Your Current Position: NEWS CENTER > Technical article
Search
-
032025-01Fixed shaft ball valve is commonly used on natural gas pipelines, and its general inspection method is: turn the valve to the fully open or fully closed position
-
202024-121. Inspection of appearance and logo Check content: whether the appearance of the valve has defects, such as cracks, bubbles, dents, etc. Check signage, nameplate and finish for compliance.
-
062024-12Ball valve has many kinds of structure, but basically the same little difference, are the opening and closing parts for the round ball core, mainly by the valve seat, ball, sealing ring
-
082024-11Gate valves usually have single gate, double gate, wedge, parallel and other structural designs
-
012024-11The sealing performance of the valve directly affects the control effect of the fluid medium and the safe operation of the system
-
252024-10Sealing surface is the most critical working face of the valve, the quality of the sealing surface directly affects the service life of the valve
-
272024-09Pressure valve is a device used in hydraulic system to control and regulate liquid flow pressure.
-
202024-09Because the seal plays a role in cutting and connecting, adjusting and distributing, separating and mixing media on the valve channel, the sealing surface is often subjected to medium corrosion, erosion, wear and easily damaged.
-
302024-08The welding slag, rust, and residue in the pipeline cause blockage or jam in the throttle orifice, guide part,
COPYRIGHT © 2017,coolyimin.com,ALL RIGHTS RESERVED BOSTER VALVE GROUP Co., Ltd Support:
Tel：+86-027-84805675 +86-027-84806280
Add：No.1 Changfu Xincheng, Wuhan Economic and Technological Development Zone
COPYRIGHT © 2017,coolyimin.com
BOSTER VALVE GROUP Co., Ltd
Support:
Add：No.1 Changfu Xincheng, Wuhan Economic and Technological Development Zone
COPYRIGHT © 2017,coolyimin.com
BOSTER VALVE GROUP Co., Ltd
Support:
